Jam Jam Jam Jam Jam

User avatar
Mark in Vegas
Posts: 32
Joined: Tue Jan 05, 2016 11:21 am
Contact:

Jam Jam Jam Jam Jam

Postby Mark in Vegas » Wed Oct 18, 2017 4:54 pm

If you're using paper supplied by Dietzgen and are seeing jams on 22 and 30 primarily i'd like to hear from you. If you're a self maintainer like me I'd REALLY like to speak to you.

User avatar
Mark in Vegas
Posts: 32
Joined: Tue Jan 05, 2016 11:21 am
Contact:

Re: Jam Jam Jam Jam Jam

Postby Mark in Vegas » Wed Nov 01, 2017 1:47 pm

After several sessions with HP support I was given this list of adjustments to perform in order. I've done these before but not all at the same time and in order. Waiting and watching..........
Maybe this will help someone else:

Here is the list of calibrations to run regarding the jamming issues:

Cutters: clean and calibrate both drawers
Drawers - clean with compressed air
Roll friction calibration run on all 4 rolls
Feed roller calibration
TOF calibration
Media Advance calibration
Line sensor calibration
Image length calibration

Save new settings as necessary.

Reload the paper and set type to 90g/sm plain paper

cmwade77
Posts: 23
Joined: Thu Jan 21, 2016 2:56 pm
Contact:

Re: Jam Jam Jam Jam Jam

Postby cmwade77 » Mon Nov 13, 2017 5:12 pm

We actually use the HP paper designed for the machine, it wasn't that much more expensive, the quality is nicer and it uses less ink and yes, the claims they make about it reducing ink consumption really are true and it is a dramatic difference.

That being said, our machine is installed on carpet, it isn't very thick carpet, but carpet nonetheless and we were getting a lot of jams and noticed the stacker wasn't quite aligning to the machine. So our dealer put a single piece thick plywood under the machine and stacker and the jams went away.


Return to “PageWide XL 8000 Hardware Discussions”

Who is online

Users browsing this forum: No registered users and 1 guest