Rear Cover Binding

User avatar
Mark in Vegas
Posts: 32
Joined: Tue Jan 05, 2016 11:21 am
Contact:

Rear Cover Binding

Postby Mark in Vegas » Thu Sep 21, 2017 4:51 pm

1 1/2 year old printer with a rear cover binding when production try's to open it. I've lubed the bearing points and checked for any interference problems. It's improved but still not correct. I'm guessing the gas springs may be at fault but they aren't shown in the SM. Any ideas?

User avatar
Mark in Vegas
Posts: 32
Joined: Tue Jan 05, 2016 11:21 am
Contact:

Re: Rear Cover Binding

Postby Mark in Vegas » Mon Sep 25, 2017 2:00 pm

Replaced the gas springs

User avatar
Mark in Vegas
Posts: 32
Joined: Tue Jan 05, 2016 11:21 am
Contact:

Re: Rear Cover Binding

Postby Mark in Vegas » Tue Sep 26, 2017 5:43 pm

Make sure you order the correct gas springs CZ309-67149 listed under the DRYER heading........


Return to “PageWide XL 8000 Hardware Discussions”

Who is online

Users browsing this forum: No registered users and 1 guest